Table of Contents
Advertisement
6. When the transceiver receives the position from the polled vessel, the
transceiver will produce a ringing alarm sound and the position from the
polled vessel is sent to a GPS chart plotter via NMEA 0183. (DSC BEEP
needs to be enabled to hear alarm.)
Press any key to stop the alarm.
7. Press the [INFO] soft key to show the position data
transferred from the polled vessel on the display.
8. Press the [▲] or [▼] key to change the display to
view the received data.
9. To exit from position request display, press the
[QUIT] soft key.
If the transceiver does not receive position
data from the polled vessel, the position and
time of LCD will show "--".
Position Request by Manually Entering an MMSI
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the individual/position call directory.
[
] "DSC" "POS REQUEST"
1.
2. Press the [▲] or [▼] key to select "NEW ID", then
press the [SELECT] soft key.
NOTE
RX POS REPLY
YAESU
POS ACKNOWLEDGED
SINCE: 00:05
INFO
RX POS REPLY
POS INFO
POS: 23°56.890N
123°56.890W
TIME:
12:56 UTC
BACK
RX POS REPLY
123°56.890W
TIME:
12:56 UTC
DST:
29.8NM
BRG: 270°T
BACK
RX POS REPLY
POS INFO
POS: --°--.---_
---°--.---_
TIME:
--:--
BACK
QUIT
POS REQUEST
HISTORY
MEMORY
NEW ID
BACK
QUIT
QUIT
QUIT
SELECT
53
Advertisement
Table of Contents
