Rear Panel - Standard Horizon ECLIPSE GPS GX1400GPS/E Owner's Manual

7.3 REAR PANEL

VHF ANT jack (VHF antenna jack)
Connects an antenna to the transceiver. Use a marine VHF antenna with
an impedance of 50 ohms.
GND Terminal (Ground Terminal)
Connects the transceiver to ships ground, for safe and optimum perfor-
mance.
Use the screw supplied with the transceiver only.
DC Input Cable
Connects the transceiver to a DC power supply capable of delivering 11 to
16 VDC.
Accessory Connection Cable (Green, Brown, Yellow & White)
Connects the transceiver to a GPS chart plotter. Refer to section "8.5.2
Accessory Cables".
EXTERNAL Speaker Connection Cable (White & Shield)
Connects the transceiver to an optional external speaker. Refer to section
"3 OPTIONAL ACCESSORIES" for a list of optional STANDARD HORIZON
Speakers.
White: External Speaker (+)
Shield: External Speaker (−)
GPS ANT Connector (GX1400GPS and GX1400GPS/E only)
Connects the optional SCU-38 External GPS Antenna.
12