Table of Contents
Advertisement
4. Press the [▲] or [▼] key to select the operating
channel you want to communicate on and press
the [SELECT] soft key.
5. Press the [YES] soft key to transmit the individual
DSC signal.
6. After an individual call is transmitted, if the reply
signal is not received, "Waiting for ACK" is shown
on the display which means the transceiver is
waiting for the vessel you called to send an
acknowledgement.
To transmit the call again, press the [RESEND] soft key.
7. When the transceiver receives an acknowledgement from the vessel you
called, the radio will automatically switch to the operating channel selected
in step 6 and produce a ringing sound.
8. Key the microphone and call the other vessel you desire to communicate with.
Individual Call by Manually Entering an MMSI
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the individual directory.
[
] "DSC" "INDIVIDUAL"
1.
2. Press the [▲] or [▼] key to select "NEW ID", then
press the [SELECT] soft key.
3. Press the [▲] or [▼] key to scroll through numbers,
0 to 9.
4. Press the [SELECT] soft key to store the number
and step to the next digit to the right.
5. Repeat steps 3 and 4 until the MMSI is complete.
If a mistake was made entering in the MMSI number, press the [◄] or [►]
key repeatedly until the wrong number is highlighted, then press the [▲]
or [▼] key to correct the entry.
INTERSHIP CH
CH:06
CH:08
CH:09
CH:10
BACK
MANUAL SELECT
INDIVIDUAL
YAESU
CATEG: ROUTINE
CH: 08
Transmit a Call?
YES
NO
INDIVIDUAL
YAESU
CH: 08
SINCE: 00:05
[Waiting for ACK]
RESEND
QUIT
INDIVIDUAL
HISTORY
MEMORY
NEW ID
BACK
SELECT
NEW ID
MMSI:
3--------
BACK
FINISH
SELECT
43
Advertisement
Table of Contents
