Drive Motor Removal - Oshkosh JLG 1930ES Service Maintenance Manual

SECTION 3 - CHASSIS & SCISSOR ARMS

Drive Motor Removal

ENSURE THE BATTERY DISCONNECT SWITCH IS IN THE OFF
POSITION BEFORE REMOVING DRIVE MOTOR.
1. Disconnect the motor cable from the power con-
trol module.
2. Drain the oil out of the unit by removing the cover
plug. Note the condition of the oil, replace if nec-
essary.
3-6
1. Drive Motor
2. Motor Mounting Bolts
Figure 3-3. Motor Removal
CAUTION
3. Washers
4. Motor Cable
3. Remove the two motor mounting bolts and wash-
ers.
4. Gently remove the drive motor (1).
3121656