Table of Contents
Advertisement
SECTION 5 - JLG CONTROL SYSTEM
5.10 MACHINE CONFIGURATION PROGRAMMING INFORMATION
NOTE: When configuring an ES scissors machine, the machine configuration must be completed before any personality set-
tings can be changed. Changing the personality settings first and then changing the model number of the machine con-
figuration will cause the personality settings to return to default.
Shaded entries are not available for the selected Market.
Configuration
Setting
Digit
1
2
1
3
(Model #)
4
5
0
1
2
2
3
(Market )
4
5
6
3
0
NO - Drive and lift up not prevented while tilted (Ground and Platform Mode).
(Tilt Cutout)
1
YES - Drive and lift up prevented while tilted (Ground and Platform Mode).
4
0
NO - Drive and lift up not prevented while elevated.
(Drive Cutout)
1
YES - Drive and lift up prevented while elevated.
0
DRIVE ONLY - Drive motion prevented while vehicle is charging.
5
1
DRIVE AND LIFT UP - Drive and lift up motions are prevented while vehicle is charging.
(Charger Interlock)
Required for CE.
0
NOT INSTALLED - Vehicle alarm will function for Arm Guard (if enabled), Overload (if LSS
enabled), and as a horn.
6
1
DESCENT - Vehicle alarm will function for Arm Guard (if enabled), Overload (if LSS
(Ground Alarm)
enabled, as a horn, and during Lift Down motion.
2
MOTION - Vehicle alarm will function for Arm Guard (if enabled), Overload (if LSS
enabled, as a horn, and during Drive and Lift motions.
0
NOT INSTALLED - Load Sensing System (LSS) is not fitted to the vehicle.
7
1
CUTOUT PLT - Load Sensing System (LSS) is fitted, and Platform Controls are prevented in
(LSS -
the event of an Overload. Ground Controls remain functional. This is the default setting
Load Sensing
for CE machines.
System)
2
CUTOUT ALL - Load Sensing System (LSS) is fitted. Platform and Ground Controls are pre-
vented in the event of an overload.
8
0
FLOODED - Batteries are conventional lead-acid type.
(Battery)
1
AGM - Batteries are absorbed glass mat type.
9
0
NO - Vehicle is not fitted with a footswitch
(Footswitch)
1
YES - Vehicle is fitted with a footswitch
10
0
NO – Vehicle is not fitted with a white noise alarm.
(Wht. Noise Alarm)
1
YES – Vehicle is fitted with a white noise alarm.
11
0
NO – Vehicle is not fitted with low temperature cutout.
(Low Temp Cutout)
1
YES – Vehicle is fitted with low temperature cutout.
12
0
NO – Vehicle is not configured for the Beacon Option.
(Beacon)
1
YES – Vehicle is configured for the Beacon Option.
2
NO RELAY – Vehicle does not have a beacon relay and is configured to work PRE-EN280.
13
0
NO – Vehicle is not configured with PHP Alarm when Pothole bar is blocked.
(PHP Alarm)
1
YES - Vehicle is configured with PHP Alarm when Pothole bar is blocked.
5-28
Table 5-4. Machine Configuration Programming Information
Description
1930ES
2032ES
2632ES
2646ES
3246ES
ANSI USA
ANSI EXPORT
AUSTRALIA
JAPAN
KOREA
CSA
CE
* Market Default Setting
0
1
2
3
4
5
(Set to your applicable ES Model
1 through 5)
0 - (ANSI USA)
(Set to your applicable market)
1
1
1
1
1
1
0
0
0
0
0
0
0
2
2
2
0
2
2
1
1
1
2
1
1
0
0
0
0
0
0
1
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1001115626-H
3121656
6
1
0
2
1
1
0
0
0
0
Advertisement
Chapters
Table of Contents
Troubleshooting
