Hd30/Hdp20 Series Disassembly - Oshkosh JLG 1930ES Service Maintenance Manual

NOTE: For unused wire cavities, insert sealing plugs for full environmental sealing

HD30/HDP20 Series Disassembly

11. With rear insert toward you, snap appropriate size extractor tool over the wire of contact to be removed.
12. Slide tool along into the insert cavity until it engages contact and resistance is felt.
13. Pull contact-wire assembly out of connector.
NOTE: Do Not twist or insert tool at an angle.
3121656
SECTION 7 - GENERAL ELECTRICAL INFORMATION & SCHEMATICS
Figure 7-15. HD/HDP Locking Contacts Into Position
Figure 7-16. HD/HDP Contact Removal
Figure 7-17. HD/HDP Unlocking Contacts
7-11