Adjusting Parameters Using The Hand Held Analyzer; Machine Setup; Machine Model Adjustment - Oshkosh JLG 1930ES Service Maintenance Manual

SECTION 5 - JLG CONTROL SYSTEM
Adjusting Parameters Using the Hand Held
Analyzer
Once you have gained access to level 1, and a personal-
ity item is selected, press the UP or DOWN arrow keys to
adjust its value, for example:
PERSO NALITIES:
DRIVE AC C EL 0.7s
PERSONALITIES:
DRIVE ACCEL 0.7s
There will be a minimum and maximum for the value to
ensure efficient operation. The Value will not increase if
the UP arrow is pressed when at the maximum value
nor will the value decrease if the DOWN arrow is
pressed and the value is at the minimum value for any
particular personality. If the value does not change
when pressing the up and down arrows, check the
access level to ensure you are at access level 1.
5-4

Machine Setup

When a machine digit item is selected, press the UP or
DOWN arrow keys to adjust its value, for example:
FAILURE TO MAKE THE PROPER SETTINGS FOR THE PARTICU-
LAR MACHINE CAN RESULT IN IMPROPER OPERATION.
G RO UND ALARM :
1=DESC ENT
GROUND ALARM:
1=DESCENT
The effect of the machine digit value is displayed along
with its value. The above display would be selected if
the machine was equipped with a ground alarm and
you wanted it to sound when driving. There are certain
settings allowed to install optional features or select the
machine model.
When selecting the machine model to match the size of
the machine, the personality settings will return to
default settings.
NOTE: Refer to Table 5-3, Machine Model Adjustment, and
Table 5-4, Machine Configuration Programming
Information for the default settings.
Password 33271 will give you access to level 1, which
will permit you to change all machine personality
and/or machine setup settings.
3121656