Advanced Menu - Compaq Armada M700 Series Maintenance And Service Manual

Advanced Menu

Begin here
Language (or press
Boot Options
Device Options
2-10 Troubleshooting
F2
)
To do this
Change the Computer Setup language.
Enable/disable
I
QuickBoot, which starts the computer
more quickly by eliminating some
startup tests. (If you suspect a memory
failure and want to test memory
automatically during startup, you may
want to disable QuickBoot.)
MultiBoot, which enables you to set a
startup sequence that can include any
drives in the system.
I
Enable/disable the embedded numeric
keypad at startup.
I
Enable/disable multiple standard
pointing devices at startup. When this
feature is disabled, only one pointing
device is activated at startup.
I Enable/disable USB legacy support for
one USB mouse and one USB
keyboard. (When USB legacy support
is enabled, the keyboard and mouse
work without a loaded USB driver.)
I Set an optional external monitor or
overhead projector connected to a
video card in a docking base as the
primary device. (When the computer
display is set as secondary, the
computer must be shut down before
undocking.)
I Set video-out mode to NTSC (default),
NTSC-J, PAL, or PAL-M.
Change the parallel port mode to or from
EPP, standard, bidirectional, or ECP.