Compaq Utilities; Selecting Computer Setup Or Compaq Diagnostics For Windows - Compaq Armada M700 Series Maintenance And Service Manual

2.5 Compaq Utilities

Compaq Utilities contain several functions that
I Determine if various computer devices are recognized by the system and are
operating properly.
Provide information about the system once it is configured.
I
Compaq Utilities include the following programs:
I Computer Setup
I Compaq Diagnostics
To access Compaq Utilities:
1. Turn on or restart the computer by clicking Start!Shut Down!Restart the
computer.
2. Press F10 when the blinking cursor appears in the upper-right corner of the display.
3. Select a menu option.
Selecting Computer Setup or Compaq Diagnostics
for Windows
The computer features two system management utilities:
I Computer Setup is a system information and configuration utility that can be used
even when your operating system is not working or will not load. It includes custom
settings that are not available in Windows.
To configure a device in Windows NT 4.0, you must use Computer Setup.
I Compaq Diagnostics for Windows is a system information and diagnostic utility
that is used within the Windows operating system. Use Compaq Diagnostics for
Windows to test system components and to display system information whenever
possible.
To configure a device in Windows 95 or 98 use the operating system itself.
Windows 95 and 98 can be used to add and remove programs, and provide Wizards
to ensure proper device drivers are installed. Diagnostics for Windows is NOT a
configuration tool and might only test devices that are properly configured by the
operating system.
NOTE: It is not necessary to configure a device connected to a USB connector on the
computer or an optional docking base.
Troubleshooting 2-7