Removing a PC Card
If you are running Windows 95 or Windows 98, you do not need to turn off the
computer or initiate Suspend before removing a PC Card.
CAUTION: If you are running Windows 95 or Windows 98, you should always stop PC
Cards before removing them to prevent damage to the PC Card or computer.
If you are running Windows NT 4.0 without CardWare provided by Compaq, you must
turn off the computer before removing a PC Card.
To remove a PC Card from the computer:
1. Press the PC Card eject button for the card to be ejected. The eject button extends
(Figure 5-13).
2. Press the eject button a second time. The PC Card partially ejects from the
PC Card slot .
3. Remove the PC Card from the PC Card slot.
Figure 5-13. Removing a PC Card
Removal and Replacement Procedures 5-15