Setup and Diagnostic Utilities
Selecting from the Tools Menu
Select
HDD Self Test Options
Selecting from the Advanced Menu
Select
Language (or press
Boot Options
Device Options
7–6
To Do This
F2
)
Change the Computer Setup language.
Enable/disable:
■
QuickBoot, which starts the notebook more
quickly by eliminating some startup tests.
(If you suspect a memory failure and want
to test memory automatically during
startup, disable QuickBoot.)
■
MultiBoot, which sets a startup sequence
that can include most bootable devices and
media in the system. For instructions, refer
to in this guide to the "MultiBoot" section.
■
Enable/disable Num lock mode at startup.
■
Enable/disable multiple standard pointing
devices at startup. (To set the notebook to
support only a single, usually nonstandard,
pointing device at startup, select Disable.)
■
Select a parallel port mode: EPP
(Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced
Capabilities Port).
To Do This
Run a quick or comprehensive self test on
any hard drive in the system.
continued
Software Guide