Using Computer Setup; File Menu - Compaq Armada M700 Series Maintenance And Service Manual

Using Computer Setup

All information and settings in Computer Setup are accessed from the File, Security, or
Advanced menus.
NOTE: Your settings in Computer Setup are not affected by updating the system ROM.
To view information or change a setting in Computer Setup:
1. Turn on or restart the computer. When the blinking cursor appears in the upper-right
corner of the screen, press
I To change the language, press
I To view navigation information, press
I To return to the Computer Setup menu from anywhere in Computer Setup,
press
Esc
2. Select the File, Security, or Advanced menu.
3. To close Computer Setup and restart the computer
I Select File!Ignore Changes and Exit, then press
or
I Select File!Save Changes and Exit, then press
4. To confirm your choice, press

File Menu

Begin here
System information
Save to floppy
Restore from floppy
Restore defaults
Ignore changes and exit
Save changes and exit
2-8 Troubleshooting
.
F10
F2
.
.
F10
.
.
F1
.
Enter
.
Enter
To do this
I View identification information about the
computer, docking base, and battery
packs.
I
View specification information about the
processor, memory and cache size, and
ROM date and family.
Save system configuration to a diskette.
Restore system configuration from a diskette.
(The diskette contains your personal
configuration, so you should restore from the
diskette before using the System Recovery
CD-ROM.)
Replace configuration settings in Computer
Setup with factory default settings.
(Identification information is retained.)
Cancel changes entered during the current
Computer Setup session, then exit and
restart the computer.
Save changes, then exit and restart the
computer.