Color Space
Selects the color space from among [Native], [Rec.709] [User1~User3]:
Saturation/Hue/Color Temperature is only available under Native mode.
Select [AUTO] or [HDR10] mode under HDR function, the color space will
be saved as Native mode automatically. It can be only changed to other
color space mode by hand.
It supports to upload user-defined Lut table "User1~User3".
-
User-defined Lut table only support RGB format. If the format is not
correct, please transform it to the correct format by using tool "Lut
Converter" (See appendix 1 for details) and named as User1.cube,
User2.cube or User3.cube.
-
Copy the User-defined Lut table to flash disk and insert it to the device,
the screen displays a prompt message to show whether to upgrade.
Select upgrade, the device will be loading automatically in a black
screen and then restart after finishing loading.
Requirements for flash disk
Format: FAT32
Memory: <16G
File directory: root directory
Must be formatting before using it
Please note that the responding time for loading user-defined Lut
table will be a bit slower. Please wait patiently.
-
The device only supports loading one table at a time. If needs to load
more than one tables, please load them one by one.
HDR
Select HDR from among [Off], [Auto], [HDR10].
HDR is only available under HDMI 1 signal input.
HDR under AUTO or DHR10 mode, and the input signal support HDR, the
below function is disabled:
Contrast, Brightness, Saturation, Hue, Sharpness, Color Space,
BackLight
Color Temperature
[Auto]
13