Clearing Jammed Nails - Grizzly H8234 Owner's Manual

clearing Jammed
nails
A jammed nail must be cleared before
using the nailer again.
to clear a jammed nail from the dis-
charge area:
1. DISCONNeCT NAILeR FROM THe
AIR SUPPLY!
2. Pull back and latch the magazine push-
er.
3. Remove the nail stick from the maga-
zine.
4. Locate the opening in the underside of
the nailer safety nose (see figure 7).
Model H8234 28° Framing Nailer
Nose Opening
figure 7. Nose opening for clearing a
jammed nail.
5. Dislodge the jammed nail with a tool
that will fit in the slot on the underside
of the nose.
6. Throw the damaged nail away and
insert a new nail stick that only contains
clean, undamaged nails. DO NOT use
dirty or damaged nails!
7. Release the catch lever and slowly
let the pusher slide to the front of the
magazine.
-11
-