Clearing Jammed Nails - Grizzly H6143 Instruction Manual

16 gauge finish nailer
Hide thumbs Also See for H6143:
Table of Contents

Advertisement

Clearing Jammed
Nails
A jammed nail must be cleared before using
the nailer again.
To clear a jammed nail from the dis-
charge area:
1.
DISCONNECT NAILER FROM THE
AIR SUPPLY!
2.
Pull back and latch the magazine
pusher.
3.
Remove the nail stick from the maga-
zine.
-10
-
4.
Open the nailer nose by removing the
rubber nose tip, squeezing the nose
release mechanism (Figure 7), and
opening the nose cover.
Nose Cover
Nose Tip
Figure 7. Nose opened to clear a jam.
5.
Dislodge the jammed nail with a tool
that will fit in the slot on the underside
of the nose.
6.
Throw the damaged nail away and
insert a new nail stick that only contains
clean, undamaged nails. DO NOT use
dirty or damaged nails!
7.
Release the catch lever and let the
pusher slide to the front of the maga-
zine.
H6143 16 Ga. Finish Nailer
Nose Release

Advertisement

Table of Contents
loading

Table of Contents

Save PDF