Download
Share
Print this page
Grizzly H5527 Owner's Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Nail Gun
  5. H5527
  6. Owner's manual

Grizzly H5527 Owner's Manual

18-gauge brad nailer
Hide thumbs Also See for H5527:

Advertisement

Quick Links

Download this manual
MODEL H5527
18-GAUGE BRAD NAILER
OWNER'S MANUAL
(For models manufactured since 01/14)
COPYRIGHT © JULY, 2003 BY GRIZZLY INDUSTRIAL, INC., REVISED OCTOBER, 2017 (MN)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR5451 PRINTED IN CHINA
V2.01.14

Advertisement

loading

Related Manuals for Grizzly H5527

Summary of Contents for Grizzly H5527

  • Page 1 OWNER'S MANUAL (For models manufactured since 01/14) COPYRIGHT © JULY, 2003 BY GRIZZLY INDUSTRIAL, INC., REVISED OCTOBER, 2017 (MN) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
  • Page 2 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

  • Page 3: Safety Instructions For Pneumatic Tools

    Keep work area well lighted. DO NOT USE UNDER INFLUENCE OF DRUGS OR ALCOHOL. H5527 18-Gauge Brad Nailer...
  • Page 4 Regularly inspect tool for any con- tools lubricated and clean for best and dition that may affect safe operation. safest performance. Follow instructions Immediately repair or replace damaged or for lubricating and changing accessories. mis-adjusted parts before operating tool. H5527 18-Gauge Brad Nailer...

  • Page 5: Additional Safety Instructions For Nailers

    COMPRESSED AIR RATING: Do not valve or any other fitting that allows air to connect the nailer/stapler to compressed remain in the tool after it is disconnected air that exceeds 120 PSI. from the air source. H5527 18-Gauge Brad Nailer...
  • Page 6 Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment. In addition, this nailer discharges at up to 85-90 deci- bels. To protect your hearing, always wear ANSI approved ear protection when operating this nailer. H5527 18-Gauge Brad Nailer...
  • Page 7 We want your feedback on this manual. What did you like about it? Where could it be improved? Please take a few minutes to give us feedback. Grizzly Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 Email: manuals@grizzly.com H5527 18-Gauge Brad Nailer...
  • Page 8 If you discover any damage find the following. after you have signed for delivery, immedi- ately call Customer Service at (570) 546- Model H5527 Inventory (Figure 1) 9663 for advice. A. Carrying Case ........1 B. Brad Nailer ......... 1 Save the containers and all packing mate- C.
  • Page 9 Compressed Air System The Model H5527 is designed to be oper- ated at 70-110 PSI using clean, dry, regu- lated, compressed air. DO NOT exceed the 120 PSI maximum operating pres- sure for your model. Before using your new nailer, regulate the...
  • Page 10 Grizzly Technical Support at (570) 546-9663 for help. To check the safety nose mechanism: — If the nailer fires when the trigger 1.
  • Page 11 4. Point the nailer down and insert a stick When replacing nails in your Model of brad nails into the magazine, as H5527, follow these guidelines: shown in Figure 4. Make sure that the pointed ends of the nails rest in the slot Gauge: at the bottom of the magazine.
  • Page 12 — If the nail either went too far or not tion. far enough, then adjust the air pres- sure. More air pressure will make the nail go deeper and less air pres- sure will decrease the nail penetra- tion. H5527 18-Gauge Brad Nailer...
  • Page 13 7. Close the nose cover, and push the magazine all the way forward until the 2. Unlatch and pull the magazine all the catch lever locks it in place. way back. 3. Remove the nail stick from the magazine. H5527 18-Gauge Brad Nailer...
  • Page 14 4. Remove the cap. of this manual for component loca- tions. 5. The top of the piston should now be visible inside the cylinder, which is housed in the head of the nailer. H5527 18-Gauge Brad Nailer...
  • Page 15 PSI delivery for each air tool. Maximum pressure for each unit is 150 PSI. T24889 T24890 Figure 10. T28041 Primrose Air Figure 8. Models T24889 & T24890 Compressor Oil. Air Filter/Regulators. H5527 18-Gauge Brad Nailer...
  • Page 16 Cleaning Lubricating Use a good solvent to clean the nose Use Grizzly Model G2820 Pneumatic Tool assembly of the nailer. Always be sure that Oil or any other type of pneumatic tool oil. the nailer is dry before using it again.

  • Page 17: Troubleshooting

    Nailer does not fire. 1. Nail is jammed in magazine or 1. Clear nailer magazine or discharge area. discharge area. 2. Piston shaft is damaged. 2. Replace piston shaft. 3. Air pressure too low. 3. Check/increase air pres- sure. H5527 18-Gauge Brad Nailer...
  • Page 18 SECTION 8: Parts Main 44 45 43V2 38V2 H5527 18-Gauge Brad Nailer...
  • Page 19 PH5527077 HEX NUT M4-.7 PH5572035 STAND PH5527078 AIR INLET PLUG CASE PH5572036 COMPRESSION SPRING 5.3 X 21 PH5527079 BUMPER PH5572037 SAFETY STAND PH5527080 QUICK RELASE HANDLE 38V2 PH5572038V2 DRIVER GUIDE V2.01.14 PH5527081 E-CLIP 2.5MM PH5572039 SPACER H5527 18-Gauge Brad Nailer...
  • Page 21 Would you recommend Grizzly Industrial to a friend? _____ Yes _____No Would you allow us to use your name as a reference for Grizzly customers in your area? Note: We never use names more than 3 times. _____ Yes _____No 10.
  • Page 22 FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 FOLD ALONG DOTTED LINE Send a Grizzly Catalog to a friend: Name_______________________________ Street_______________________________ City______________State______Zip______ TAPE ALONG EDGES--PLEASE DO NOT STAPLE...
  • Page 23 WARRANTY Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any par- ticular purpose, are hereby limited to the duration of this written warranty.