Administrator's Guide
Service Name
Protocol type
HTTP (Remote)
TCP
HTTPS (Remote)
TCP
Configuration Examples of IPsec/IP Filtering
Receiving IPsec packets only
This example is to configure a default policy only.
Default Policy:
❏ IPsec/IP Filtering: Enable
❏ Access Control: IPsec
❏ Authentication Method: Pre-Shared Key
❏ Pre-Shared Key: Enter up to 127 characters.
Group Policy: Do not configure.
Receiving printing data and printer settings
This example allows communications of printing data and printer configuration from specified services.
Default Policy:
❏ IPsec/IP Filtering: Enable
❏ Access Control: Refuse Access
Group Policy:
❏ Enable this Group Policy: Check the box.
❏ Access Control: Permit Access
❏ Remote Address(Host): IP address of a client
❏ Method of Choosing Port: Service Name
❏ Service Name: Check the box of ENPC, SNMP, HTTP (Local), HTTPS (Local) and RAW (Port9100).
Receiving access from a specified IP address only
This example allows a specified IP address to access the printer.
Default Policy:
❏ IPsec/IP Filtering: Enable
❏ Access Control:Refuse Access
Group Policy:
❏ Enable this Group Policy: Check the box.
❏ Access Control: Permit Access
❏ Remote Address(Host): IP address of an administrator's client
Advanced Security Settings for Enterprise
Local port
number
Any port
80
Any port
443
99
Remote port
Features controlled
number
HTTP(S) client (firmware updating and
root certificate updating)