Protocol Setting Items - Epson SureColor SC-T7700D Administrator's Manual

Administrator's Guide
Protocol
SLP Settings
WSD Settings
LLTD Settings
LLMNR Settings
LPR Settings
RAW(Port9100) Settings
RAW(Custom Port) Settings
IPP Settings
FTP Settings
SNMPv1/v2c Settings
SNMPv3 Settings

Protocol Setting Items

Bonjour Settings
Items
Use Bonjour
Bonjour Name
Bonjour Service Name
Location
Top Priority Protocol
Wide-Area Bonjour
iBeacon Settings
Items
Enable iBeacon Transmission
Advanced Security Settings for Enterprise
Description
You can enable or disable the SLP function. SLP is used for push scanning and network
searching in EpsonNet Config.
You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and print from the WSD port.
You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
You can enable or disable the LLMNR function. When this is enabled, you can use name
resolution without NetBIOS even if you cannot use DNS.
You can specify whether or not to allow LPR printing. When this is enabled, you can print from
the LPR port.
You can specify whether or not to allow printing from the RAW port (Port 9100). When this is
enabled, you can print from the RAW port (Port 9100).
You can specify whether or not to allow printing from the RAW port (custom port). When this
is enabled, you can print from the RAW port (custom port).
You can specify whether or not to allow printing from IPP. When this is enabled, you can print
over the Internet.
You can specify whether or not to allow FTP printing. When this is enabled, you can print over
an FTP server.
You can specify whether or not to enable SNMPv1/v2c. This is used to set up devices,
monitoring, and so on.
You can specify whether or not to enable SNMPv3. This is used to set up encrypted devices,
monitoring, etc.
Setting value and Description
Select this to search for or use devices through Bonjour.
Displays the Bonjour name.
Displays the Bonjour service name.
Displays the Bonjour location name.
Select the top priority protocol for Bonjour print.
Set whether to use Wide-Area Bonjour.
Setting value and Description
Select this to enable the iBeacon transmission function.
86