Changing From Ethernet Connection To Wi-Fi Connection - Epson SureColor SC-T7700D Administrator's Manual

Administrator's Guide
If the IP address assignment setting is manual, confirm with the network administrator whether the same IP
address can be used on the new network.
Note:
When the Wi-Fi connection is enabled, the Ethernet connection is disabled.
Related Information
"Changing from Ethernet Connection to Wi-Fi Connection" on page 73
&
"Changing from Wi-Fi Connection to Ethernet Connection" on page 74
&

Changing from Ethernet Connection to Wi-Fi Connection

Changing to Wi-Fi Connection from the Control Panel
Change the Ethernet connection to Wi-Fi connection from the printer's control panel. The changing connection
method is basically the same as the Wi-Fi connection settings. See the topic in this guide on Wi-Fi connection
settings from the printer's control panel.
Related Information
"Connecting to the Wireless LAN (Wi-Fi)" on page 22
&
Changing to Wi-Fi Connection by Using Web Config
Change the Ethernet connection to Wi-Fi connection by using Web Config.
1. Access Web Config and select the Network tab > Wi-Fi.
2. Click Setup.
3. Select the SSID for the access point and enter the password.
If the SSID you want to connect to is not displayed, select Enter SSID and enter the SSID.
4. Click Next.
5. Confirm the displayed message and click OK.
6. Disconnect the Ethernet cable from the printer.
Note:
You can also change the connection method by using Epson Device Admin. For details, see the manual or help for Epson
Device Admin.
Related Information
"Accessing Web Config" on page 24
&
"Logging on to the Printer Using Web Config" on page 48
&
"Epson Device Admin" on page 68
&
Appendix
73