Maintenance; Schedule; Monthly Checks - MSA S-Cap-Air Maintenance Manual

3

Maintenance

3.1

Schedule

MSA uses the most modern production technologies and best design practice to keep
maintenance expenses as low as possible.
In case of doubt regarding the maintenance and inspection intervals, please contact
your local sales organisation and / or check your local regulations and require-
ments.
Component
Hood
Hose
Regulator
Cylinder Valve
Gauge / Tamper Tag Inspect
Bag
Cylinder
S-Cap-Air Assembly Functional Check
This maintenance schedule is recommended by the manufacturer.
∗) The official hydrostatic test should be carried out as required by national regulations.
Please observe national regulations and contact your national authorities for further
information.
Rubber components are subject to ageing according to conditions and therefore must be
checked in regular intervals and replaced if necessary.
Note: Some maintenance works may only be made by trained and authorised
technicians
3.2

Monthly checks

Check cylinder for full charge [pressure gauge indication in green section]. Check that
tamper tag is intact, check entire S-Cap-Air for visible external damage.
8
Work to be performed
Clean, disinfect
Inspect
Clean, disinfect
Inspect
/ Clean
Inspect
Clean
Inspect
Clean
Inspect
Charge
Hydrostatic Test
On pick- After Monthly
ing up use
X
X
X
X
X
X
X X
X
X
X
X
X
X
Annu- Notes
ally
4.2
X 3.3
4.2
X 3.3
4.2
X 3.3
X X 3.2
4.2
X 3.3
4.2
X 3.3
2.1
∗)
X 3.4