Advertisement
CLEANING & MAINTENANCE
Always unplug the appliance and allow it to cool completely before cleaning.
•
The Butter Sprayer is NOT dishwasher safe.
•
Never immerse the Power Cord or Charging Base in water or other liquids, or allow
•
moisture to contact these parts.
To clean the exterior of the Butter Sprayer, wipe the Main Body with a damp cloth.
•
Never use rough, abrasive or poisonous cleaners.
The Butter Sponge is included to prevent butter from dripping onto the sprayer.
•
Extra Sponges are included to replace your Butter Sponge as needed after
longterm use or before longterm storage.
A replacement Spray Nozzle is included if your Spray Nozzle is damaged or lost. To
•
replace the Spray Nozzle, first remove the Nozzle Cap and Butter Sponge. Unscrew
the Spray Nozzle from the Main Body, then unscrew the Spare Nozzle from the
Charging Base by turning counterclockwise. Screw the Spare Nozzle onto the Main
Body by turning clockwise.
∙ 14 ∙
CLEANING & MAINTENANCE
clean the
interior with
Hot Water
To prevent additional drips on the
front of the Butter Sprayer, it is
recommended to occasionally clean
the Butter Sponge. Remove the
Nozzle Cap and Butter Sponge, and
wash both with warm, soapy water.
Ensure that both are thoroughly
dried before replacing.
To clean the interior of the Butter
Sprayer, remove any excess butter
with a nylon, silicone or rubber utensil.
Once the Butter Sprayer is emptied,
place it on the Charging Base with
the power cord plugged in. When
the Indicator Light begins flashing
blue, remove the Butter Sprayer from
the Charging Base, fill with hot water
and spray into a sink. Repeat until the
interior chamber is clean.
Prevent Drips
by cleaning the
Butter Sponge
∙ 15 ∙
Advertisement
