Setting Up Your Butter Sprayer - Dash DBD200 Instruction Manual

SETTING UP YOUR BUTTER SPRAYER

Remove the Cap from the Main Body by unscrewing it
1
counterclockwise 90 degrees.
Place 1-8 tbsp of butter into the Melting Chamber. It is
2
recommended to only melt as much butter as will be
used. This will make cleaning and storing easier.
Lock the Cap back onto the Main Body by turning it
3
clockwise and aligning the front tabs of the Cap and Main
Body.
Plug the Charging Base into a wall socket. The Power
4
Indicator Light will illuminate blue.
∙ 8 ∙
SETTING UP YOUR BUTTER SPRAYER
Place your Butter Sprayer on the Charging Base to begin
5
charging and melting butter.
The Power Indicator Light on the Charging Base will
6
change to orange. The Charging/Melting Indicator
Light on the Butter Sprayer will illuminate orange.
This indicates that the Butter Sprayer is melting the
butter.
∙ 9 ∙