Recalling Data - Hach DR/2010 Instrument Manual

3.6

Recalling Data

1. After pressing
STORE
assigned; Y is the next available sample number within that group):
SAMPLE #Y
&&&& "
or
GX SAMPLE #Y
&&&& &
2. Press or
ENTER STORE
sample number, use the
enter the desired number with the
to accept the desired number. The instrument will store the data, then
revert back to the measurement display.
If the desired storage number is known, enter the number with the
keys, then press
NUMERIC
3. To change the group number before storing a displayed data point go
to the Setup menu by pressing the
enter the Setup menu. Use the
option (Auto Group must be OFF). Press
group number with the
keys. Press
ENTER
1. To recall data stored in the DR/2010 Spectrophotometer, press
. If the data is stored only in Group 0, the display will show
RECALL
data for the last sample of the last program used (for example):
&&&& $
, the display shows (X is the group number
#" &&&
5=
&&& #"
/ 5=
to accept the sample number. To enter another
keys to scroll to the desired number or
ARROW
NUMERIC
(pressing
STORE
EXIT
keys to scroll down to the Group
ARROW
keys or scroll to it using the
NUMERIC
. Press the key to return to the
EXIT
#" &&&
51
nm
A
nm
A
keys. Press
ENTER
is not necessary).
ENTER
key once. Press
SHIFT SETUP
. Enter the correct
ENTER
menu.
Store
nm
+H
or
STORE
to
ARROW
SHIFT