Section 5 Data Recall And Storage; Recalling Data - Hach DR/820 Instrument Manual

SECTION 5

5.1 Recalling Data

DATA RECALL AND STORAGE
To store sample data, press
is displayed. Data must be stored if you wish to recall it later for
review, downloading or printing. The following information is
stored for each sample:
•
instrument model
•
instrument serial number
•
chemical form
•
concentration
•
units
•
absorbance
•
%T
•
date
•
time
•
sample number
•
program number
After the key is pressed, a flashing question mark icon is
STORE
shown in the lower-right portion of the display. In the center of
the display, the next available storage number will appear. If this
storage location is acceptable, press
To select an empty storage number (between 1 and 99), use the
keys to scroll to the desired number or enter the desired
ARROW
number with the numeric keys. Press
instrument will store the data, then revert back to the
measurement display.
To recall data stored in the colorimeter, press the
Use the keys to scroll through the stored data. Only data
ARROW
numbers containing stored sample reading data (of the available
storage numbers 1-99) are displayed in the RECALL menu. For
39
after the sample measurement
STORE
to accept it.
ENTER
to accept. The
ENTER
key.
RECALL