Printing Data - Hach DR/2010 Instrument Manual

3.7

Printing Data

If the data is stored in more than one group, the display will show
(for example):
&&&& 
2. Enter the desired group number by scrolling to it with the
or by entering the group number with the numeric keys. Press
The wavelength displayed in
sample was measured, not the current position of the monochromator.
3. To recall other data within the selected group, use the
scroll through the samples in the group.
4. To recall samples stored in other groups, press
show the next group number of stored data (in increasing order). For
example, after reviewing data in Group 1, the display might show:
&&&& 
Press until the instrument returns to the measure mode.
EXIT
Printed data will include the following information:
•
instrument model and serial number
•
concentration, absorbance or %T (whichever is displayed)
•
date
•
time
•
group number (for stored data only)
•
sample number (for stored data only)
•
the wavelength at which the test was read
•
warning conditions in effect at the time of measurement
 &&&
4A?= /H K 
is the wavelength at which the
Recall
 &&&
4A?= /H K  %
52
nm
ARROW
ENTER
keys to
ARROW
. The display will
EXIT
nm
keys
.