Hach DR/2010 Instrument Manual page 69

Note: The low
limit reminds
stored program
users when
displayed values
are below the
working range of
the test.
Note: The high
limit reminds
stored program
users when
displayed values
are above the
working range of
the test.
17. Press the
DOWN ARROW
Form2, the display will show:
&&&& 
Enter an Alternate Form3 if desired or press the
display will show:
 &&&&
18. To change the low limit of the procedure range, press
press the
DOWN ARROW
limit. Press
ENTER
19. Press the
DOWN ARROW
&&&& 
20. To change the high limit of the procedure range, press
press the
DOWN ARROW
range limit. Press
21. Press the
DOWN ARROW
&&&& 
22. Press . Enter the desired wavelength using the
ENTER
wavelength must be between 400 to 900 nm. Press
desired wavelength is displayed.
. If any information was entered for Alternate
&&& #
) JAH =JA. H !
# &&&
M E EJ
). Use the
NUMERIC
to accept the displayed number.
key. The display will show:
# &&&
0E D E EJ ' '''
). Use the numeric keys to enter the desired high
to accept the displayed number.
ENTER
. The display will show:
# &&&
9=LA A JD "
69
nm
DOWN ARROW
nm
ENTER
keys to enter the low range
nm
ENTER
nm
keys. The
NUMERIC
when the
ENTER
. The
(if not,
(if not,