Hach DR/2010 Instrument Manual page 61

Display
New Prgm:
Program Name:
Decimal:
Units:
Symbol:
Alternate Form2:
(Alternate Form3:)
(Alternate Form4:)
Low Limit: 0.00
High Limit: 9.99
Wavelength: 0nm
Calib. Table: 0
Zero: Off
Calib Formula: F0
Timer1: Not Set
(Timer2):
(Timer3):
Store Program
Table 7 Create Program Submenu Selections
Enter a program number between 950 and 999.
Enter name using
ARROW
maximum).
Use keys to move decimal to correct place.
ARROW
Use keys to scroll through choices. Custom units that are not
ARROW
included in the option list may be entered as part of the Symbol (16
character maximum). Leave the Units option at "none".
Enter the chemical form (i.e., PO
keys and numeric keys. Custom units may also be entered as part of the
chemical symbol. (16 character maximum).
Submenu:
Decimal2- move decimal to correct position. Press
.
ARROW
Units2- scroll to correct units. Press
Symbol2- Enter an alternate chemical form (i.e., P
and
ARROW NUMERIC
Factor2- enter factor number using the
Enter the low limit of the measurement range with
Enter the high limit of the measurement range with
Enter the desired wavelength with the
Press the
DOWN ARROW
Submenu:
Zero Sample- put blank in and press
Dial nm to X- Dial to correct wavelength.
Enter concentrations of each standard as prompted.
Default is Off. To force the calibration through 0,0 point, use
to toggle to On.
Submenu:
F0: C=Piecewise (a line from data point to data point).
Press to choose a different type of equation (C = Concentration,
ENTER
A = Absorbance; a, b, c = coefficients):
F1: C = a + bA
F2: C = a + bA + cA
F3: C = a + bA + cA
Enter minutes and seconds.
Press to store program.
ENTER
Selection/Action
keys and/or
NUMERIC
3-
) as a character string using arrow
4
ENTER
keys.
NUMERIC
NUMERIC
.
ZERO
2
2 3
+ dA
61
keys (16 character
. Press
ENTER
. Press .
DOWN ARROW
O or P) using
2 5
keys.
keys.
NUMERIC
keys.
NUMERIC
keys. Press
ENTER
.
ARROW
DOWN
.
key