Copying; Copying Function; Copying Method; Copying Cancel - Pantum M6800 Series User Manual

8. Copying

8.1. Copying function

Copy
Multipage
Clone
Poster
Collated copy
Common
Duplex copying
copying
Image quality
Intensity
Resizing
Paper setting
Arrangement mode
ID card
Intensity
copying
Paper Size
Intensity
Receipt
copying
Paper Size

8.2. Copying method

1. Press "copying key"/"ID card copying key"/"receipt copying key" on control panel.
2. Put an original into the ADF with its front upward (only for plain copying) or on the
glass platen with its front downward. (For how toput an original, please see
3. Set copying quantity with "direction or number key" according to types (99 pieces at
maximum).
4. Press "Startup key" for copying.
5. If the original is put on the glass platen, the printer will give a prompt of "Scan the Next
Page" after scanning one page. If the next page exists, please remove the original scanned
and put the next page on the glass platen; then, press "Start". After all pages have been
scanned, please press "OK".

8.3. Copying cancel

Press "cancel key" on control panel if canceling copying.
Instructions
Print a multi-page document to a piece of paper.
Print several identical images to a piece of paper.
Print a one-page original to pieces of paper.
Collate copies of an original.
It supports manual duplex copying for originals.
Set the definition mode to improve the copying effect.
Adjust deep-light copying effect by setting intensity.
Reduce or enlarge the size of image copied.
Set the paper size and paper type.
Set the arrangement mode of ID card to be copied.
Adjust deep-light copying effect by setting intensity.
Set the paper size.
Adjust deep-light copying effect by setting intensity.
Set the paper size.
Chapter 2.5.)
73