Print A Page For Clean & Fix; Auto Shut-Off Setting - Pantum M6800 Series User Manual

12.1.6.Print a Page for Clean & Fix
"Print a Page for Clean & Fix"function can clean the toner, paper powder and other
inpurities, so as to realize better printing effect.The printer will start up Print a Page for
Clean & Fix function automatically after the printer has printed a certain number of
pages. You can also launch Print a Page for Clean & Fix function manually by setting
up the printer panel. The steps are as follows:
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "System Setting" option.
3) Press "▲"or"▼"and select "Clean & Fix" option, then press "OK" to start cleaning and
fixing of the fuser unit.

12.1.7. Auto shut-off setting

"Auto shut-off setting" to set off condition and off delay of printer.
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "System Setting" option.
3) Press direction key "▲" or "▼" to select options of "Auto off set", press "OK" to set of
condition and off delay.
Note: Set auto off condition:
• Shutdown under no-port state (default configuration): no port is connected,
Wi-Fi function deactivated,printer is under standby or sleep mode.
• Shutdown under idle state: the printer is under standby or sleep mode.
• If auto off condition is satisfied, printer will be off at the preset time.
• After printer is off, power consumption is 0.5W or lower.
• Individual countries (or regions) do not support auto off setting.
115