Print Settings; Cancel Printing; Printing Mode; Printing With The Automatic Feeder Tray - Pantum M6800 Series User Manual

7.2.Print Settings

You can set up printing parameters with the following two methods before sending printing
work (such as paper type, paper size and paper source).
Temporary printing
Operating
setup change
system
1. Click "File" menu – "Print"
– "Select printer" -"Printer
properties" (the detailed steps
Windows 7
may differ because of multiple
operating systems).
1. Click "File" menu – "Print".
macOS
2. Change setup in the window
popping out.
Note： • Priority of App setup is senior to printer setup.

7.3.Cancel printing

If you want to cancel the operation during printing, please press "Cancel" key on the
printer's control panel.

7.4.Printing Mode

The printer can print with auto feed tray and manual feed tray. The defaulted state is
auto selection, and if there is printing medium in the manual feed box, papers in manual
feed tray will be used with priority.

7.4.1.Printing with the Automatic Feeder Tray

Before printing, please make sure mediums of corresponding quantity have been
installed inside the auto feed tray, and there is no printing medium in the manual fed tray.
• For precautions on loading paper, see
Note：
• For the type of media to be printed with the automatic feeder tray,see
2.1.
Permanent default
setup change
1. Click "Start" menu- "Control Panel"
– "Devices and Printers".
2. Right click on the printer icon,
select "Printing preference" and
then change setup and save it.
1. Click "File" menu – "Print".
2. Change setup in the window
popping out and click to save the
preset. (Select preset every time
before printing, or print according
to default setup.)
Chapter 2.
Chapter
64