Pantum M6800 Series User Manual page 19

1.5.Control Panel
1.5.1.Overview of control panel
The layout of the printer control panel is shown below:
Control panel without the fax feature
No.
Name
LCD Display
1
2 Copy Button
Scan Button
3
ID Card Copy Button
4
5
Wi-Fi button
6
Bill Copy Button
7
Cancel
8
Start Button
Functions
Display operation interface and product information.
Press this button to enter into copy mode.
Press this button to enter into scan mode.
Press this button to enter into ID Card Copy mode.
Short press Wi-Fi button to turn on direct Wi-Fi connection of the printer
and automatically print out "Mobile Device Wi-Fi Connection Wizard"
page (for models with Wi-Fi function only).
Long press Wi-Fi button for over 2s to start WPS when Wi-Fi is not
connected or to disconnect Wi-Fi when it has already been connected
(for models with Wi-Fi function only).
Open save toner function(applicable to non-Wi-Fi model only).
Press this button to enter into Bill Copy mode.
Execute cancel operation
Idle state interface under copy mode, to reset the "Number of
Copies" to 01.
This is used to start relevant operations after finishing operation
settings.
In case of a feed failure, please press this key for pick-up and
printing again.
6