Scan To Ftp - Pantum M6800 Series User Manual

9.3.3. Scan to FTP

Be sure the user is in an Internet-connected environment in scanning files to FTP server.
If you want to scan large files, you may need to input the server address, user name and
password to log in the server, with specific operation steps as below:
1. Be sure the printer and the computer are both switched on and connected with each
other properly.
2. Please see Chapter 6.2.3.3
feature, alternatively, see
3. Put an original on the glass platen or into the ADF (please see
to put an original).
4. Press "Scan" button on the control panel, and press "▲" or "▼" to select "Single Page
Scan" or "Merge Scan", then press "OK" button.
5. Press "Menu" and then "OK" to enter the "Scan Setting" interface.
6. Press "▲" or "▼" to select "Scan To" options; then, press OK.
7. Press "▲" or "▼" to select "Scan to FTP" and press "OK" button.
8. Press "▲" or "▼" to select the server and press "OK" button; Press "Start" button to start
scan.
9. For merge scan, please put files to be scanned on the glass platen and then press
"Start" to scan the next page (directly continuous scanning is available if scanning with the
ADF).
to configure the FTP address book (for machine with the fax
Chapter 12.7).
Chapter 2.5 for how
96