Wac6502D-E, Wac6502D-S, And Wac6503D-S - ZyXEL Communications NWA1123ACPRO-EU0101F User Manual

1.6.1 WAC6502D-E, WAC6502D-S, and WAC6503D-S

The LEDs will stay ON when the WAC6500 Series is ready. You can change this setting in the Maintenance
> LEDs > Suppression screen.
Figure 5 WAC6500 Series LEDs
The following table describes the LEDs.
Table 6 WAC6500 Series LEDs
LED
PWR/SYS
Chapter 1 Introduction
COLOR STATUS
Red Slow Blinking (On for 1s,
Off for 1s)
Green On
Red Off
Green On
Red On
Green Off
Red Fast Blinking (on for
50ms, Off for 50ms)
Green Off
Red Slow Blinking (blink for 3
times, Off for 3s)
Green Off
Red Slow Blinking (blink for 2
times, Off for 3s)
Green Off
NWA / WAC Series User's Guide
DESCRIPTION
The WAC is booting up.
The WAC is ready for use.
There is system error and the WAC cannot boot up, or the
WAC suffered a system failure.
The WAC is doing firmware upgrade.
The Uplink port is disconnected.
The wireless module of the WAC is disabled or failed.
21