Active Log Summary - ZyXEL Communications NWA1123ACPRO-EU0101F User Manual

The following table describes the labels in this screen.
Table 77 Configuration > Log & Report > Log Setting > Edit Remote Server
LABEL
Log Settings for
Remote Server
Active
Log Format
Server
Address
Log Facility
Active Log
Selection
#
Log Category
Selection
OK
Cancel

14.3.4 Active Log Summary

This screen allows you to view and to edit what information is included in the system log, e-mail profiles,
and remote servers at the same time. It does not let you change other log settings (for example, where
and how often log information is e-mailed or remote server names). To access this screen, go to the Log
Setting screen, and click the Active Log Summary button.
Chapter 14 Log and Report
DESCRIPTION
Select this check box to send log information according to the information in this section. You
specify what kinds of messages are included in log information in the Active Log section.
This field displays the format of the log information. It is read-only.
VRPT/Syslog - Zyxel's Vantage Report, syslog-compatible format.
CEF/Syslog - Common Event Format, syslog-compatible format.
Type the server name or the IP address of the syslog server to which to send log information.
Select a log facility. The log facility allows you to log the messages to different files in the syslog
server. Please see the documentation for your syslog program for more information.
Use the Selection drop-down list to change the log settings for all of the log categories.
disable all logs (red X) - do not send the remote server logs for any log category.
enable normal logs (green check mark) - send the remote server log messages and alerts for all
log categories.
enable normal logs and debug logs (yellow check mark) - send the remote server log
messages, alerts, and debugging information for all log categories.
This field is a sequential value, and it is not associated with a specific address.
This field displays each category of messages. It is the same value used in the Display and
Category fields in the View Log tab. The Default category includes debugging messages
generated by open source software.
Select what information you want to log from each Log Category (except All Logs; see below).
Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green checkmark) - log regular information and alerts from this category
enable normal logs and debug logs (yellow check mark) - log regular information, alerts, and
debugging information from this category
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
NWA / WAC Series User's Guide
172