Reboot; Chapter 19 Reboot; Overview; What You Need To Know - ZyXEL Communications NWA1123ACPRO-EU0101F User Manual

19.1 Overview

Use this screen to restart the device.

19.1.1 What You Need To Know

If you applied changes in the Web configurator, these were saved automatically and do not change
when you reboot. If you made changes in the CLI, however, you have to use the write command to
save the configuration before you reboot. Otherwise, the changes are lost when you reboot.
Reboot is different to reset; reset returns the device to its default configuration.

19.2 Reboot

This screen allows remote users can restart the device. To access this screen, click Maintenance >

Reboot.

Figure 118 Maintenance > Reboot
Click the Reboot button to restart the NWA/WAC. Wait a few minutes until the login screen appears. If
the login screen does not appear, type the IP address of the device in your Web browser.
You can also use the CLI command reboot to restart the NWA/WAC.
NWA / WAC Series User's Guide
194
C
H A P T E R
Reboot
19