Technical Reference - ZyXEL Communications NWA1123ACPRO-EU0101F User Manual

802.11 a/b/g/n/ac unified
Table of Contents

Advertisement

The following table describes the labels in this screen.
Table 54 Configuration > Object > MON Profile > Add/Edit MON Profile
LABEL
Activate
Profile Name
Channel dwell time
Scan Channel Mode
Set Scan Channel List
(2.4 GHz)
Set Scan Channel List
(5 GHz)
OK
Cancel

10.3 Technical Reference

The following section contains additional technical information about the features described in this
chapter.
Rogue APs
Rogue APs are wireless access points operating in a network's coverage area that are not under the
control of the network's administrators, and can open up holes in a network's security. Attackers can
take advantage of a rogue AP's weaker (or non-existent) security to gain access to the network, or set
up their own rogue APs in order to capture information from wireless clients. If a scan reveals a rogue AP,
you can use commercially-available software to physically locate it.
Chapter 10 MON Profile
DESCRIPTION
Select this to activate this monitor mode profile.
This field indicates the name assigned to the monitor mode profile.
Enter the interval (in milliseconds) before the NWA/WAC switches to another channel for
monitoring.
Select auto to have the NWA/WAC switch to the next sequential channel once the
Channel dwell time expires.
Select manual to set specific channels through which to cycle sequentially when the
Channel dwell time expires. Selecting this options makes the Scan Channel List options
available.
Select one or more than one channel to have the NWA/WAC using this profile scan the
channel(s) when Scan Channel Mode is set to manual.
These channels are limited to the 2.4 GHz range (802.11 b/g/n).
Select one or more than one channel to have the NWA/WAC using this profile scan the
channel(s) when Scan Channel Mode is set to manual.
These channels are limited to the 5 GHz range (802.11 a/n). Not all NWA/WACs support
both 2.4 GHz and 5 GHz frequency bands.
Click OK to save your changes back to the NWA/WAC.
Click Cancel to exit this screen without saving your changes.
NWA / WAC Series User's Guide
117

Advertisement

Table of Contents
loading

Table of Contents