10.1 Overview
This screen allows you to set up monitor mode configurations that allow your NWA/WAC to scan for
other wireless devices in the vicinity. Once detected, you can use the Wireless > MON Mode screen
(Section 7.3 on page
Not all NWA/WACs support monitor mode and rogue APs detection.
10.1.1 What You Can Do in this Chapter
The MON Profile screen
be used by the NWA/WAC.
10.2 MON Profile
This screen allows you to create monitor mode configurations that can be used by the APs. To access
this screen, login to the Web Configurator, and click Configuration > Object > MON Profile.
Figure 70 Configuration > Object > MON Profile
The following table describes the labels in this screen.
Table 53 Configuration > Object > MON Profile
LABEL
Add
Edit
Remove
Activate
80) to classify them as either rogue or friendly.
(Section 10.2 on page
DESCRIPTION
Click this to add a new monitor mode profile.
Click this to edit the selected monitor mode profile.
Click this to remove the selected monitor mode profile.
To turn on an entry, select it and click Activate.
NWA / WAC Series User's Guide
C
H A P T E R
MON Profile
115) creates preset monitor mode configurations that can
115
10