Nwa1123-Ac Pro And Wac6103D-I - ZyXEL Communications NWA1123ACPRO-EU0101F User Manual

Table 6 WAC6500 Series LEDs (continued)
LED
Management
WLAN
WLAN
UPLINK
LAN
Locator

1.6.2 NWA1123-AC PRO and WAC6103D-I

The LEDs will stay ON when the NWA1123-AC PRO or WAC6103D-I is ready. You can change this setting
in the Maintenance > LEDs > Suppression screen.
Figure 6 NWA1123-AC PRO and WAC6103D-I LEDs
Chapter 1 Introduction
COLOR STATUS
Green On
Slow Blinking (blink for 3
times, Off for 3s)
Off
Green On
Off
Green On
Off
Amber/ On
Green
Blinking
Off
Amber/ On
Green
Blinking
Off
White Blinking
Off
NWA / WAC Series User's Guide
DESCRIPTION
The WAC AP is managed by a controller.
The WAC AP is searching (discovery) for a controller.
The WAC AP is in standalone mode.
The 2.4 GHz WLAN is active.
The 2.4 GHz WLAN is not active.
The 5 GHz WLAN is active.
The 5 GHz WLAN is not active.
Amber - The port is operating as a 100-Mbps connection.
Green - The port is operating as a Gigabit connection
(1000 Mbps).
The WAC is sending/receiving data through the port.
The port is not connected.
Amber - The port is operating as a 100-Mbps connection.
Green - The port is operating as a Gigabit connection
(1000 Mbps).
The LAN port is sending/receiving data through the port.
The LAN port is not connected.
The Locator is activated and will show the actual location
of the WAC between several devices in the network.
The Locator function is off.
22