Ap Mode Radio Information - ZyXEL Communications NWA1123ACPRO-EU0101F User Manual

The following table describes the labels in this screen.
Table 24 Monitor > Wireless > AP Information > Radio List
LABEL
More Information
Status
Loading
MAC Address
Radio
OP Mode
AP/WDS Profile
Profile
Frequency Band
Channel
Tx Power
Station
Rx PKT
Tx PKT
Rx FCS Error
Count
Tx Retry Count

5.4.1 AP Mode Radio Information

This screen allows you to view a selected radio's SSID details, wireless traffic statistics and station count
for the preceding 24 hours. To access this window, select a radio and click the More Information button
in the Radio List screen.
Chapter 5 Monitor
DESCRIPTION
Click this to view additional information about the selected radio's wireless traffic and station
count. Information spans a 24 hour period.
This displays whether or not the radio is enabled.
This indicates the AP's load balance status (UnderLoad or OverLoad) when load balancing is
enabled on the NWA/WAC. Otherwise, it shows - when load balancing is disabled or the radio
is in monitor mode.
This displays the MAC address of the radio.
This indicates the radio number on the NWA/WAC to which it belongs.
This indicates the radio's operating mode. Operating modes are AP (MBSSID), MONITOR, Root
AP or Repeater
This indicates the AP profile name and WDS profile name to which the radio belongs.
This indicates the AP profile name to which the radio belongs.
This field is available only on the NWA/WAC that doesn't support WDS.
This indicates the wireless frequency band currently being used by the radio.
This shows - when the radio is in monitor mode.
This indicates the radio's channel ID.
This displays the output power of the radio.
This displays the number of wireless clients connected to this radio on the NWA/WAC.
This displays the total number of packets received by the radio.
This displays the total number of packets transmitted by the radio.
This indicates the number of received packet errors accrued by the radio.
This indicates the number of times the radio has attempted to re-transmit packets.
NWA / WAC Series User's Guide
58