18.1 Overview
Use this screen to adjust coverage depending on the orientation of the antenna.
18.1.1 What You Need To Know
Positioning the antennas properly increases the range and coverage area of a wireless LAN.
On the NWA/WAC that comes with internal antennas and also has an antenna switch, you can adjust
coverage depending on the orientation of the antenna for the NWA/WAC radios using the web
configurator, the command line interface (CLI) or a physical switch. Check
Table 2 on page 12
Figure 116 WAC6103D-I Physical Antenna Switch
Note: With the physical antenna switch, you apply the same antenna orientation settings to
both radios. You can set the radios to have different settings while using the web
configurator or the command line interface.
Note: The antenna switch in the web configurator has priority over the physical antenna
switch after you Enable Software Control in the Maintenance > Antenna screen. By
default, software control is disabled.
18.2 Antenna Switch Screen
To access this screen, click Maintenance > Antenna.
Antenna Switch
to see if your NWA/WAC has an antenna switch.
NWA / WAC Series User's Guide
192
C
H A P T E R
Table 1 on page 11
18
and