Hob - Daily Use - AEG 47036IU-MN User Manual

4.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and
cleaning" chapter.
Clean the appliance and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
4.2 Using the sensor fields
To activate a function touch and hold the
selected symbol on the display for
minimum 1 second.
4.3 Setting the time
You must set the time before you
operate the oven.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.

5. HOB - DAILY USE

WARNING!
Refer to Safety chapters.
5.1 Hob control panel
1 2
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell
which functions operate.
or to set the correct
3 4
10
4.4 Changing the time
You cannot change the time
of day if the Duration
End
Press again and again until the
indicator for the Time of Day function
flashes.
To set a new time, refer to "Setting the
time".
4.5 Preheating
Preheat the empty appliance to burn off
the remaining grease.
1. Set the function
maximum temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
maximum temperature.
4. Let the appliance operate for 15
minutes.
5. Set the function
maximum temperature.
6. Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow in the room is sufficient.
5 6
9 8 7
ENGLISH
or
function operates.
and the
and set the
and set the
9