Table of Contents
Advertisement
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
5.12 The Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with
Touch
for 4 seconds.
Deactivate the hob with
To deactivate the function: activate the
hob with
Touch
for 4 seconds.
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
Set the heat setting in 10 seconds. You
can operate the hob. When you
deactivate the hob with
operates again.
5.13 Power management
function
• Cooking zones are grouped
according to the location and number
6. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with correct cookware.
Cookware material
. Do not set the heat setting.
comes on.
.
. Do not set the heat setting.
comes on.
.
for 4 seconds.
the function
of the phases in the hob. See the
.
illustration.
• Each phase has a maximum electricity
load.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase is
exceeded.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones changes between two
levels.
.
• correct: cast iron, steel, enamelled
steel, stainless steel, the bottom
made of multi-layer (with correct mark
from a manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is correct for an induction
hob if:
• some water boils very quickly on a
zone set to the highest heat setting.
• a magnet pulls on to the bottom of
the cookware.
ENGLISH
13
Advertisement
Table of Contents
