Dst Setting And Screen Saver - Digital Watchdog VMAX User Manual

User Manual | 32

2.10 DST Setting and Screen Saver

nd st
DST starts at 2:00 local time on 2 Sunday of March, and ends at 2:00 DST on 1 Sunday of November.
During DST (Daylight Saving Time), the DVR time clock adjusts to the regional time zone. The clock will shift by one hour after
the DST settings start and will delay by one hour after DST finishes.
To make DST setting on the DVR, go to the menu [SYSTEM > SYSTEM INFO] and click [DATE/TIME]. User can setup DST
"Begin & End" time after checking [USE DST] box.
When you return to search mode, you can clearly see there is no data in all channels for one hour, since the clock jumps from
2:00 to 3:00.
st
The clock jumps backward to 1:00 standard time on 1 Sunday of November.
When DST finishes, there will be an hour of overlapped video. A Blue color indicates the overlapped video in the Search Bar
during playback mode.
When user clicks on the overlapped video data, a message titled [Recorded Video Selection] will pop up. The user can then
select whether to play DST Data or Non-DST Data. Click [OK] to play DST image. Click [CANCEL] to play Non-DST image.