Getting Started; Baby Unit Power Supply; Parent Unit Battery Installation - Motorola MBP853CONNECT-3 User Manual

2. Getting Started

2.1

Baby Unit Power Supply

Switch to turn ON
the camera
1. Connect the small plug of the power adapter to the Baby Unit (camera) and
the other end to a suitable mains power socket.
NOTE
Only use the enclosed power adapter (5V DC / 1500mA).
2. Slide the ON/OFF switch to the ON position. The power LED will light up
in blue.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2

Parent Unit Battery Installation

1. Insert the wire tab of the rechargeable battery pack into the contact slot as
shown above and fit the battery pack into the compartment.
Getting Started
ON OFF
Red
Black
Small cross head or
Flat end screw driver
Power adapter plug
11