User Account And Camera Setup On Android™ Devices; Power On And Connect The Camera; Download The Hubble App; Run Hubble For Motorola Monitors App On Android™ Devices - Motorola MBP853CONNECT-3 User Manual

Digital video baby monitor with wi-fi internet viewing
Hide thumbs Also See for MBP853CONNECT-3:
Table of Contents

Advertisement

5.3
User Account and Camera Setup on Android™
Devices
What you need
• MBP853CONNECT camera
• The power adapter for the Camera
• Device with Android™ system version 4.2 or above
5.3.1

Power ON and Connect the Camera

• Connect the power adapter to an mains power socket and insert the plug
into the micro USB socket on the back of the Camera.
• Make sure that the ON/OFF switch is in the ON position.
• The Camera's Red LED flashes after the Camera has finished booting. When
you hear two 'beeps' this means the Camera is ready to setup.
5.3.2

Download the Hubble App

• Go to the Google Play™ Store to search "Hubble for Motorola Monitors".
• Download the Hubble for Motorola Monitors App from the Google Play™
Store and install it on your Android™ device.
5.3.3
Run Hubble for Motorola Monitors App on Android™ Devices
• Ensure that your Android™ device is connected to your Wi-Fi
• Run "Hubble for Motorola Monitors" App, enter your account information,
read through the Terms of Service, then select "I agree to the Terms of Use"
before you tap Create. (Picture A1)
Note
If you already have a Hubble App account, please select Already have an
Wi-Fi® Internet Viewing
®
router.
23

Advertisement

Table of Contents
loading

Table of Contents