Using The Baby Monitor; Setting Up; Pan And Tilt; Night Vision Mode - Motorola MBP853CONNECT-3 User Manual

3. Using the Baby Monitor

3.1

Setting up

• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the angle of the Baby Unit's head by rotating the camera up, down, left
and right until you are satisfied with the image shown on the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2

Pan and Tilt

The camera can be remotely controlled from the Parent Unit.
1. Press the UP button or
2. Press the LEFT button or
3.3

Night Vision Mode

The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the top of the unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The
top of the screen.
3.4

Talk Mode

Press and hold the
the Baby Unit's loudspeaker. The
screen.
3.5

Video ON/OFF

V
Press VIDEO ON/OFF key to turn the LCD display on or off, whilst still
leaving the audio monitor on.
Using the Baby Monitor
DOWN button to tilt up or down.
T
TALK button on the Parent Unit to talk to your baby through
T
icon will be displayed at the top of the LCD
RIGHT button to pan left or right.
icon will be displayed at the
15