Procedure For Resetting The Camera - Motorola MBP853CONNECT-3 User Manual

8. Procedure for resetting the Camera

Note: If your Camera is moved from one router (e.g. home) to another router
(e.g. office) or you have Camera setup issues, then the Camera must be reset
again. Please reset the Camera with the following procedures:
1. Slide the ON/OFF switch to OFF.
2. Press and hold the PAIR button on the underside of the Camera, then slide
the ON/OFF switch to ON (the LED indicator will light up).
3. Release the PAIR button when you hear a confirmation beep and wait for
Camera to complete an internal reset procedure. The LED indicator will
turn red and flashes slowly when the Camera is reset successfully.
4. You can add your camera again by following the steps in section 5.3.4 for
Android devices or in section 5.4.4 for iOS devices.
38 Procedure for resetting the Camera