Other Series - HIKVISION iDS-96000NXI-I16/24(B) Series Quick Start Manual

2.2.3 Other Series

Purpose:
Here we take the example of HDD installation of iDS-9600NXI-I8/8F(B) Series to describe the steps.
Before you start:
Disconnect the power from the NVR before installing a hard disk drive (HDD). A factory
recommended HDD should be used for this installation.
Tools Required: Screwdriver.
Step 1 Fasten the hard disk mounting handle to the hard disk with screws.
Step 2 Insert the key and turn in clockwise direction to open the panel lock.
Step 3 Press the buttons on the panel of two sides and open the front panel.
Network Video Recorder Quick Start Guide
Figure 2-10 Fix HDD
Figure 2-11 Fasten Hard Disk
31