Table of Contents
Advertisement
Network Video Recorder Quick Start Guide
11
DC 12V
12
GND
13
Power Switch
14
Power Supply
15
VIDEO OUT
16
LINE IN
alarm output is triggered.
If the device has 4 alarm outputs, the Ctrl 12V power is
controled by alarm output 5.
If the device has 8 alarm outputs, the Ctrl 12V power is
controled by alarm output 9.
Connect positive pole to number (1) of Ctrl 12V, and
connect negative pole to G of Ctrl 12V.
12 VDC, 1 A power output for external device.
Connect positive pole to number (1) of DC 12V, and
connect negative pole to G of DC 12V.
Ground (needs to be connected when NVR starts up).
Switch for turning on/off the device.
100 to 240 VAC power supply.
BNC connector for video output.
RCA connector for audio input.
26
Advertisement
Table of Contents
