Table of Contents
Advertisement
Step 4 Insert the hard disk along the slot until it is placed into position.
Step 5 Repeat the above steps to install other hard disks onto the NVR.
Step 6 After having finished the installation of all hard disks, close the front panel and lock it with
the key again.
2.3 Connections
2.3.1 Alarm Input Wiring
The alarm input is an open/closed relay. To connect the alarm input to the device, use the
following diagram.
If the alarm input is not an open/close relay, please connect an external relay between the alarm
input and the device.
Network Video Recorder Quick Start Guide
Figure 2-12 Open Front Panel
Figure 2-13 Insert HDD to the Slot
32
Advertisement
Table of Contents
